instax SHARE SP-3 printer, the latest line in the instax SHARE series of printers that can print photos taken with a smartphone on INSTAX SQUARE film.
Select your best shots from your smartphone and get instax prints by just transferring the shots from the app to SP-3 via Wi-Fi connection.
You can also print Images from to your Instagram, Facebook, 微博, Google Photos, flickr and Dropbox accounts.
A new laser exposure system achieves a faster printing time of 13 seconds from print data transfer to print output.
At the same time, printing noise is lower which makes your printing experience much more enjoyable.
High resolution with print pixels of 800 x 800 dots and of 318 dpi clearly shows detailed gradations and the face expressions of a full-length portrait, characters, materials, etc.
New Templates added to the instax SHARE app:
Add text to photos
Split one image into two
|Recording method||3-color exposure with OLED|
|Film||FUJIFILM Instant Film "instax SQUARE"|
|Photo capacity||10 prints / pack|
|Image size||62mm x 62mm|
|Supported image size||800 x 800 dots|
|Printing resolution||12.5 dots/mm (318 dpi, 80 μm dot pitch)|
|Printing levels||256 levels per color (RGB)|
|Interface Standard compliance||IEEE802.11b/g/n, Operation frequency: 2412 MHz to 2462 MHz (11 ch)|
|Supported image format||JPEG, PNG|
|Printing time||Image recording - photo output (Feed out) Approx. 13 sec.|
|Approximate pringting capacity||Approx. 160 prints (Based on our test conditions)
*Varies depending on the conditions of use.
|Charging time||Approx. 3 hours (Varies depending on battery remaining level)|
|Power consumption||3 W|
|Operating temperature||+5°C to + 40°C / +41°F to + 104°F(no condensation)|
|Dimensions||116 mm x 130.5 mm × 44.4 mm (excluding projections)|
|Weight||312g (without battery and film pack)|
|Supplied accessory||Micro USB cable, Ferrite core|